{"product_id":"ikon-ik41-dante-4-channel-class-d-amplifier-4x1500w-4ohm-2u","title":"Martin Audio iKon iK41-DANTE 4 Channel Class D Amplifier 4x1500W @ 4Ω 2U","description":"The iKON iK41 is an advanced 4-channel power amplifier which combines high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated controller amplifier for Martin Audio WPM line arrays, TORUS 8, and selected other systems, the iK41 can also provide multi-channel amplification for select Martin Audio loudspeakers.iK41 can deliver a full 1500 watts per channel into 4Ω and its high efficiency reduces the energy drawn from the mains supply and ensures the power reserves needed to deliver superb sound under arduous live conditions.Ethernet is used for system remote control and monitoring via Martin Audio’s VU-NET software application, while a user friendly front panel interface allows full local control of all features. Dante digital audio network inputs are also provided for digital audio distribution and control.Powerful DSP is fully integrated into the iK41 to provide a multitude of features that ensure maximum performance of select loudspeaker systems. It also provides up to 1000 FIR filter taps @ 48kHz on each output channel, which is essential to implement DISPLAY’s wide bandwidth optimisation process in WPM line array systems.The iK41 employs comprehensive protection functions to maintain safe operating conditions of both the amplifierand the loudspeakers driven — including a sophisticated loudspeaker limiter suite which incorporates peak, RMS and excursion limiting, as well as multiband limiting for passive 2-way systems.Product Features\nAnalogue, AES3 and Dante™ digital audio network inputs\nFour channels of efficient Class D amplification\nHigh power density in 2U rack height\nUp to 6,000 Watts total power output, depending on load impedance\nHigh performance 96kHz DSP on all inputs and outputs (48kHz on outputs when implementing FIR filters)\nSwitch mode power supply\nGlobal mains operation, 85V to 240V auto-sensing\nIntuitive, user-friendly, front panel interface\nEthernet network for system operation, control and monitoring via Martin Audio VU-NET™ software\nComprehensive protection and monitoring functions\nProduct SpecificationsGeneral\nType:  Four-channel Class D amplifier\nPower Output:\n1500W into 2Ω\n1500W into 4Ω\n750W into 8Ω\n325W into 16Ω\n3000W bridged per channel pair, 4Ω\n3000W bridged per channel pair, 8Ω\n\n\nCV Line Output:\n685W, 25V line\n1500W, 70V line\n1163W, 100V line\n\n\nDigital Signal Processing:  96kHz\/48kHz DSP on all inputs and outputs\nCooling:  Dual vari-speed fans, front-to-back airflow\nMaximum Ambient Temperature:  40°C (105°F)\nAudio Inputs\/Outputs\nAnalogue IN\/LINK (4 Channels):  4 x female, 4 x male Neutrik™ XLR\nAnalogue Input Impedance:  20kΩ balanced to ground\nMaximum Analogue Input Level:  +20dBu\nAES3 IN\/LINK (2 CHANNELS):  1 x female, 1 x male Neutrik™ XLR, balanced\nDANTE™ (4 CHANNELS):  2 x shielded RJ45, primary and secondary\nAmplifier Outputs:  4 x Neutrik Speakon™ NL4\nAudio Performance\nDynamic Range:\n\u0026gt;113dBA, analogue input\n\u0026gt;114dBA AES\/Dante™ input\n\n\nFrequency Response:  7Hz-30kHz (-2.5dB points, 4 ohm load)\nTotal Harmonic Distortion:  \u0026lt;0.05% typical @ 1kHz, 4 ohm load\nSlew Rate:  \u0026gt;60V per microsecond\nDamping Factor:  \u0026gt;800 at amplifier output, ref 8 ohms\nControl and Monitoring Network\nProtocol:  Ethernet\nControl Application:  Martin Audio VU-NET™\nDigital Signal Processing\nSample Rate:  96kHz (48kHz for FIR filter implementation)\nPhysical Inputs:\n4 x analogue, 1 x AES pair with link output,\n4 x Dante™ inputs routable to four DSP drive modules\n\n\nDrive Module Input DSP:\nInput signal routing, delay, gain, HPF, Phase, Mute\nEQ: 2 x low shelf, 6 x PEQ\/bandpass and FIR shelving filters\n\n\nDrive Module Output DSP:\nSource, delay, gain, Phase, Mute, crossover filters, limiters\nEQ: low shelf, 8 x PEQ \/ band pass and shelving filters\n\n\nPower Supply\nType:  High performance Series Resonant\nAC Input Operating Range:  85 – 240V ~ AC, 47 - 63Hz\nMains Inrush Current:  6A at 115V, 12A at 230V (max for \u0026lt;10ms)\nMains Connector:  Neutrik 32A Powercon™\nPhysical \u0026amp; Dimensions\nDimensions (WxHxD):  482mm x 2U\/88mm x 441mm (18.98in x 2U\/3.46in x 17.35in) incl handles and optional rear support\nWeight:  12.5kg (27.5lbs)\n","brand":"Martin Audio","offers":[{"title":"Default Title","offer_id":58332914024822,"sku":"MAUIK41DAN","price":5487.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0361\/2681\/files\/MAUIK41DAN_Martin_Audio_IK41-DANTE_Image_1.jpg?v=1784913282","url":"https:\/\/spartanmusic.co.uk\/products\/ikon-ik41-dante-4-channel-class-d-amplifier-4x1500w-4ohm-2u","provider":"Spartan Music","version":"1.0","type":"link"}