Martin Audio Blackline XP118 Subwoofer

Description

The XP118 is a compact, high performance subwoofer for indoor use with the XP12 and XP15 full-range loudspeakers.

It extends the low frequency operating range of the combined system down to 42Hz and can be used singly, stacked in omni or cardioid mode, or flown via integral M10 insets. It features a long-excursion 18” (460mm)/4” (100mm) voice coil driver in a compact enclosure that has four reflex ports with a large frontal area to reduce turbulent air noise at very high levels.

A convection-cooled Class D amplifier module delivers 2000Wpeak output to the driver for maximum low frequency extension and chest-thumping punch. Crossover, EQ, metering and control functions are provided by on-board DSP via a rotary encoder interface and multi-function colour screen on the rear panel.

The XP118 enclosure is built for the road, constructed from durable plywood and finished in textured black paint. A perforated steel grille protects the driver, and the enclosure has a 35mm pole-mount socket in the top surface and two ergonomic side handles. 

FEATURES:

  • Compact, self-powered subwoofer
  • 1 x 18” (460mm) driver with 4” (100mm) voice coil
  • 2000W of Class D amplification
  • Global power supply with PFC (Power Factor Correction)
  • On-board DSP with rotary control interface
  • Multi-function display for metering, control and function selection
  • Peak and RMS limiters
  • Bluetooth® control and streaming option
  • Durable plywood enclosure
  • Screw-free, perforated steel grille
  • Integral ergonomic handles
  • 35mm pole-mount socket

SPECIFICATION:

Acoustics

  • Type: Compact self-powered subwoofer
  • Frequency response
    • 42Hz – 150kHz ±3dB
    • -10dB @ 38Hz
  • Driver
    • LF: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet
  • Maximum spl: 131dB continuous, 137dB peak (Half space)
  • Dispersion (-6DB): Omnidirectional
  • Crossover: 100Hz, active

Audio In/Out

  • Input connectors: 2 x female XLR/ ¼” jack combo
  • Mic/line input impedance: 8 kΩ balanced
  • ¼” Jack ts input impedance: 1 MΩ unbalanced
  • Mix output connector: 1 x male XLR
  • Mix output impedance: 600 Ω Balanced

Internal Processing

  • Input channel EQ: 3-band
  • Speaker EQ: 4 presets, including cardioid mode
  • Protection: Peak and RMS limiting, amplifier thermal protection

Amplifier Module

  • Type: Class D, Bridged Tied
  • Peak output power: 2000W total
  • Average efficiency: 89%
  • Cooling: Convection
  • Maximum ambient temperature: 35°C (95°F) for full output

Power Supply

  • Type: Switch-mode, fixed frequency with PFC
  • Ac input operating range: 100-240V ~ AC, 50 - 60Hz
  • Power factor: > 0.98
  • Nominal power consumption: 1000W Max
  • Mains connector: 3-pin IEC

Physical & Dimensions

  • Enclosure: Birch/poplar ply
  • Finish: Black textured paint
  • Protective grille: Black perforated steel
  • Fittings: 16 x M10 inserts, pole-mount socket, 2 x bar handles, provision for castors
  • Dimensions
    • (W) 662mm x (H) 536mm x (D) 640mm
    • (W) 26.1in x (H) 21.1in x (D) 25.2in
  • Weight: 44kg (97lbs)

Manufacturer: Martin Audio

Related Collections:

Product form

SKU: MA-BLACKLINE-XP118

In stock

£1,435.00 Incl. VAT

    Delivery informationDelivery information

    There is a free standard delivery option for most UK orders as well as a £2.99 option which means your order will arrive faster than normal.

    For standard delivery your order should arrive within 2-5 working days. For the faster option it should be 1-3 working days.

    If you're from Northern Ireland there will be a £5 surcharge for heavier items. If you're buying a light item (under 2kg) please let us know as we may be able to refund your postage after the purchase.

    Buy now pay laterBuy now pay later

    Paypal Pay in 3 lets you spread your purchase interest free over 3 separate payments.

    If you'd like to use Paypal Pay in 3, please perform the following steps.

    1. Add the item to your cart as normal.

    2. Check out with Paypal.

    3. Log into Paypal.

    4. You should see a screen detailing the item costs. Scroll down and you should see an option for "Pay in 3".

    5. Continue the checkout process.

    1/3 of the purchase price will be taken immediately and then the rest over the next 2 months the rest of the payment will be taken.

    Please see more info about the service here.

    As with any sort of buy now pay later, please only use this service for added convenience when making a bigger purchase. It should only be used if you're 100% sure you can make all of the payments on time.

    Description

    The XP118 is a compact, high performance subwoofer for indoor use with the XP12 and XP15 full-range loudspeakers.

    It extends the low frequency operating range of the combined system down to 42Hz and can be used singly, stacked in omni or cardioid mode, or flown via integral M10 insets. It features a long-excursion 18” (460mm)/4” (100mm) voice coil driver in a compact enclosure that has four reflex ports with a large frontal area to reduce turbulent air noise at very high levels.

    A convection-cooled Class D amplifier module delivers 2000Wpeak output to the driver for maximum low frequency extension and chest-thumping punch. Crossover, EQ, metering and control functions are provided by on-board DSP via a rotary encoder interface and multi-function colour screen on the rear panel.

    The XP118 enclosure is built for the road, constructed from durable plywood and finished in textured black paint. A perforated steel grille protects the driver, and the enclosure has a 35mm pole-mount socket in the top surface and two ergonomic side handles. 

    FEATURES:

    • Compact, self-powered subwoofer
    • 1 x 18” (460mm) driver with 4” (100mm) voice coil
    • 2000W of Class D amplification
    • Global power supply with PFC (Power Factor Correction)
    • On-board DSP with rotary control interface
    • Multi-function display for metering, control and function selection
    • Peak and RMS limiters
    • Bluetooth® control and streaming option
    • Durable plywood enclosure
    • Screw-free, perforated steel grille
    • Integral ergonomic handles
    • 35mm pole-mount socket

    SPECIFICATION:

    Acoustics

    • Type: Compact self-powered subwoofer
    • Frequency response
      • 42Hz – 150kHz ±3dB
      • -10dB @ 38Hz
    • Driver
      • LF: 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet
    • Maximum spl: 131dB continuous, 137dB peak (Half space)
    • Dispersion (-6DB): Omnidirectional
    • Crossover: 100Hz, active

    Audio In/Out

    • Input connectors: 2 x female XLR/ ¼” jack combo
    • Mic/line input impedance: 8 kΩ balanced
    • ¼” Jack ts input impedance: 1 MΩ unbalanced
    • Mix output connector: 1 x male XLR
    • Mix output impedance: 600 Ω Balanced

    Internal Processing

    • Input channel EQ: 3-band
    • Speaker EQ: 4 presets, including cardioid mode
    • Protection: Peak and RMS limiting, amplifier thermal protection

    Amplifier Module

    • Type: Class D, Bridged Tied
    • Peak output power: 2000W total
    • Average efficiency: 89%
    • Cooling: Convection
    • Maximum ambient temperature: 35°C (95°F) for full output

    Power Supply

    • Type: Switch-mode, fixed frequency with PFC
    • Ac input operating range: 100-240V ~ AC, 50 - 60Hz
    • Power factor: > 0.98
    • Nominal power consumption: 1000W Max
    • Mains connector: 3-pin IEC

    Physical & Dimensions

    • Enclosure: Birch/poplar ply
    • Finish: Black textured paint
    • Protective grille: Black perforated steel
    • Fittings: 16 x M10 inserts, pole-mount socket, 2 x bar handles, provision for castors
    • Dimensions
      • (W) 662mm x (H) 536mm x (D) 640mm
      • (W) 26.1in x (H) 21.1in x (D) 25.2in
    • Weight: 44kg (97lbs)

    Manufacturer: Martin Audio

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account