Crown CDi 4|300 Power Amplifier

Description

The Crown CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.

Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.

The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

Features:

  • Exclusive multi-patented DriveCore™ Technology
  • Supports configuration and control using HiQnet® Audio Architect™
  • Monitoring and control over TCP/IP
  • Colour LCD and front panel user interface for amplifier configuration, control, and monitoring
  • Programmable GPIO (general purpose input/output) control port
  • Digital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)
  • Support for importing of FIR filter coefficients
  • 20 device presets – 1 factory and 19 user
  • 96kHz/32-bit floating-point signal processing
  • Universal power supply with PFC for reduced current draw and industry-leading efficiency
  • Power saving modes
  • Remote power off – Sleep mode activated via AUX port
  • 70Vrms/100Vrms direct drive
  • Each channel independently configurable for low z or high z operation
  • Advanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overload

Specification:

General

  • Digital Signal Processing 96kHz, 32-bit floating point
  • Voltage Gain (at maximum level setting) 4/8Ω, 70Vrms and 100Vrms Operation: 34dB
  • Frequency Response (8Ω, 20Hz - 20kHz): ±0.5dB
  • Total Harmonic Distortion (at full rated power, from 20Hz - 20kHz): 0.35%
  • Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz): >104dB
  • Intermodulation Distortion (60Hz and 7kHz at 4:1, from - 30dB to full rated power): ≤0.35%
  • Damping Factor (20Hz to 100Hz): >1000
  • Crosstalk (below rated power, 20Hz to 1kHz): >80dB
  • Common Mode Rejection (20Hz to 1kHz, typical): >70dB
  • DC Output Offset (with inputs shorted): ±10mV
  • Input Impedance (Nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced
  • Maximum Input Level (Low Amp Gain Mode): +20dBU
  • Required AC Mains (±10%): 100V – 240V~50/60Hz
  • Cooling: Continuously variable speed forced air, front-to-back airflow
  • Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240 V~
  • Load Impedance Stereo/Dual Mode: 2Ω - 16Ω; 70Vrms and 100Vrms
  • Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms
  • Maximum Fan Noise (re dB SPL @ 1M): 51dBA

Physical & Dimensions

  • Height: 3.5inch
  • Width: 19inch
  • Depth: 12.25inch
  • Weight: 7.31kg
Manufacturer: Crown

Related Collections:

Product form

SKU: CRN-CDI-4-300
Barcode: 691991006371

Out of stock

£2,209.00 Incl. VAT

    Delivery informationDelivery information

    There is a free standard delivery option for most UK orders as well as a £2.99 option which means your order will arrive faster than normal.

    For standard delivery your order should arrive within 2-5 working days. For the faster option it should be 1-3 working days.

    If you're from Northern Ireland there will be a £5 surcharge for heavier items. If you're buying a light item (under 2kg) please let us know as we may be able to refund your postage after the purchase.

    Buy now pay laterBuy now pay later

    Paypal Pay in 3 lets you spread your purchase interest free over 3 separate payments.

    If you'd like to use Paypal Pay in 3, please perform the following steps.

    1. Add the item to your cart as normal.

    2. Check out with Paypal.

    3. Log into Paypal.

    4. You should see a screen detailing the item costs. Scroll down and you should see an option for "Pay in 3".

    5. Continue the checkout process.

    1/3 of the purchase price will be taken immediately and then the rest over the next 2 months the rest of the payment will be taken.

    Please see more info about the service here.

    As with any sort of buy now pay later, please only use this service for added convenience when making a bigger purchase. It should only be used if you're 100% sure you can make all of the payments on time.

    Description

    The Crown CDi DriveCore 4|300 offers streamlined functionality to work in almost any small/medium sized installation such as restaurants, retail stores, and more.

    Designed for ease-of-use in a variety of applications, the 4|300 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer.

    The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

    Features:

    • Exclusive multi-patented DriveCore™ Technology
    • Supports configuration and control using HiQnet® Audio Architect™
    • Monitoring and control over TCP/IP
    • Colour LCD and front panel user interface for amplifier configuration, control, and monitoring
    • Programmable GPIO (general purpose input/output) control port
    • Digital signal processing (Input/output EQ filters, crossover, input/output delay, LevelMAXTM limiters)
    • Support for importing of FIR filter coefficients
    • 20 device presets – 1 factory and 19 user
    • 96kHz/32-bit floating-point signal processing
    • Universal power supply with PFC for reduced current draw and industry-leading efficiency
    • Power saving modes
    • Remote power off – Sleep mode activated via AUX port
    • 70Vrms/100Vrms direct drive
    • Each channel independently configurable for low z or high z operation
    • Advanced protection circuits – Amplifier and loads are protected against shorted outputs, DC, mismatched loads, overheating, over/under-voltage, and high-frequency overload

    Specification:

    General

    • Digital Signal Processing 96kHz, 32-bit floating point
    • Voltage Gain (at maximum level setting) 4/8Ω, 70Vrms and 100Vrms Operation: 34dB
    • Frequency Response (8Ω, 20Hz - 20kHz): ±0.5dB
    • Total Harmonic Distortion (at full rated power, from 20Hz - 20kHz): 0.35%
    • Analog Input Signal to Noise Ratio (ref. rated power, 100V, 20Hz - 20kHz): >104dB
    • Intermodulation Distortion (60Hz and 7kHz at 4:1, from - 30dB to full rated power): ≤0.35%
    • Damping Factor (20Hz to 100Hz): >1000
    • Crosstalk (below rated power, 20Hz to 1kHz): >80dB
    • Common Mode Rejection (20Hz to 1kHz, typical): >70dB
    • DC Output Offset (with inputs shorted): ±10mV
    • Input Impedance (Nominally balanced, nominally unbalanced): 20 kΩ balanced, 10 kΩ unbalanced
    • Maximum Input Level (Low Amp Gain Mode): +20dBU
    • Required AC Mains (±10%): 100V – 240V~50/60Hz
    • Cooling: Continuously variable speed forced air, front-to-back airflow
    • Power Supply Connector: Standard IEC type 320 inlet for detachable connector 100 – 240 V~
    • Load Impedance Stereo/Dual Mode: 2Ω - 16Ω; 70Vrms and 100Vrms
    • Load Impedance Bridge Mono: 4Ω - 16Ω; 140Vrms and 200Vrms
    • Maximum Fan Noise (re dB SPL @ 1M): 51dBA

    Physical & Dimensions

    • Height: 3.5inch
    • Width: 19inch
    • Depth: 12.25inch
    • Weight: 7.31kg
    Manufacturer: Crown

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account