Laserworld CS-4000RGB FX Laser

Description

The Laserworld CS-4000RGB FX is a pure diode, analogue modulated, full-colour RGB laser system with a total output power of up to 4'000 mW and guaranteed output power of 3'500 mW.

The red laser source has an output power of 850 mW / 635 nm, the green of 850 mW / 520 nm and the royal-blue laser source has an output power of 1'800 mW / 450 nm.

The diode laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of ca. 3 mm and beam divergence of 1.4 mrad. The galvo system has a scan speed of up to 28kpps @ 8° ILDA.

Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display. 

Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 130 (layers, tunnels, fences, waves, etc.) can be projected in different colours and in various speed. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.

Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.

The Laserworld CS-4000RGB FX is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).

There are safety features like a key switch, an interlock and an on-off switch.

The Laserworld CS-4000RGB FX show laser projector comes with a compact housing, which is lightweight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

The Laserworld CS-4000RGB FX is ideal for semi-professional applications and is perfectly suitable in medium-sized to large clubs and discos as well as for mobile DJs, private use and in any other party location.

FEATURES:

  • 4 W pure diode RGB laser system
  • 3 additional grating effects: Line, Burst and Radial
  • DMX controllable, master-slave operation possible
  • Full diode projector - no DPSS anymore
  • Computer controllable via ILDA
  • Plug & play: Sound-to-light and stand-alone modes
  • Capable of basic graphics - 28kpps @ 8° ILDA scanners
  • Full-colour with analogue modulation
  • Front panel laser beam masking plate
  • 360° mounting bracket

SPECIFICATION:

  • Total Power:  4'000 mW
  • Guaranteed Power:  3'500 mW
  • Power Red:  850 mW / 635 nm
  • Power Green:  850 mW / 520 nm
  • Power Blue:  1'800 mW / 450 nm
  • Beam Specifications:  ca. 3 mm / 1.4 mrad
  • Scanner:  28kpps @ 8° ILDA; galvo system
  • Max. Scan Angle:  40°
  • Laser Source:  Diode
  • Laser Class:  4
  • Operation Modes:  stand-alone, sound-to-light, DMX, ILDA, master-slave
  • Basic Patterns:  ca. 130 (layers, tunnels, fences, waves, etc.)
  • Accessories:  power cable, manual, interlock, key
  • Power Supply:  85V - 250 V AC
  • Power Consumption:  60 W
  • Dimensions:  200 x 165 x 141 mm
  • Weight:  5.0 kg
Manufacturer: Laserworld

Related Collections:

Product form

SKU: LW-CS-4000RGB-FX
Barcode: 7640144997458

Out of stock

£835.00 Incl. VAT

    Delivery informationDelivery information

    There is a free standard delivery option for most UK orders as well as a £2.99 option which means your order will arrive faster than normal.

    For standard delivery your order should arrive within 2-5 working days. For the faster option it should be 1-3 working days.

    If you're from Northern Ireland there will be a £5 surcharge for heavier items. If you're buying a light item (under 2kg) please let us know as we may be able to refund your postage after the purchase.

    Buy now pay laterBuy now pay later

    Paypal Pay in 3 lets you spread your purchase interest free over 3 separate payments.

    If you'd like to use Paypal Pay in 3, please perform the following steps.

    1. Add the item to your cart as normal.

    2. Check out with Paypal.

    3. Log into Paypal.

    4. You should see a screen detailing the item costs. Scroll down and you should see an option for "Pay in 3".

    5. Continue the checkout process.

    1/3 of the purchase price will be taken immediately and then the rest over the next 2 months the rest of the payment will be taken.

    Please see more info about the service here.

    As with any sort of buy now pay later, please only use this service for added convenience when making a bigger purchase. It should only be used if you're 100% sure you can make all of the payments on time.

    Description

    The Laserworld CS-4000RGB FX is a pure diode, analogue modulated, full-colour RGB laser system with a total output power of up to 4'000 mW and guaranteed output power of 3'500 mW.

    The red laser source has an output power of 850 mW / 635 nm, the green of 850 mW / 520 nm and the royal-blue laser source has an output power of 1'800 mW / 450 nm.

    The diode laser sources ensure powerful laser beams. The projector has good beam specifications with a beam diameter of ca. 3 mm and beam divergence of 1.4 mrad. The galvo system has a scan speed of up to 28kpps @ 8° ILDA.

    Pattern size can be set by two rotary buttons on the rear side of the housing. The sensitivity of the microphone can be adjusted via the integrated display. 

    Through DMX, in the stand-alone mode as well as in the sound-to-light mode about ca. 130 (layers, tunnels, fences, waves, etc.) can be projected in different colours and in various speed. If the stand-alone mode is active, the pre-programmed patterns run without assistance and in the sound-to-light mode, the laser system projects according to the sound.

    Next to the modes mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX cable to a main projector (master projector) project the same patterns like the master projector.

    The Laserworld CS-4000RGB FX is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software (e.g. Showeditor or Showcontroller).

    There are safety features like a key switch, an interlock and an on-off switch.

    The Laserworld CS-4000RGB FX show laser projector comes with a compact housing, which is lightweight and has a stable bracket. The 360° mounting bracket allows for different mounting positions: a hanging as well as a standing installation is possible - ideal for mobile DJs and temporary laser shows, but also for fixed installations at a truss or at the ceiling.

    The Laserworld CS-4000RGB FX is ideal for semi-professional applications and is perfectly suitable in medium-sized to large clubs and discos as well as for mobile DJs, private use and in any other party location.

    FEATURES:

    • 4 W pure diode RGB laser system
    • 3 additional grating effects: Line, Burst and Radial
    • DMX controllable, master-slave operation possible
    • Full diode projector - no DPSS anymore
    • Computer controllable via ILDA
    • Plug & play: Sound-to-light and stand-alone modes
    • Capable of basic graphics - 28kpps @ 8° ILDA scanners
    • Full-colour with analogue modulation
    • Front panel laser beam masking plate
    • 360° mounting bracket

    SPECIFICATION:

    • Total Power:  4'000 mW
    • Guaranteed Power:  3'500 mW
    • Power Red:  850 mW / 635 nm
    • Power Green:  850 mW / 520 nm
    • Power Blue:  1'800 mW / 450 nm
    • Beam Specifications:  ca. 3 mm / 1.4 mrad
    • Scanner:  28kpps @ 8° ILDA; galvo system
    • Max. Scan Angle:  40°
    • Laser Source:  Diode
    • Laser Class:  4
    • Operation Modes:  stand-alone, sound-to-light, DMX, ILDA, master-slave
    • Basic Patterns:  ca. 130 (layers, tunnels, fences, waves, etc.)
    • Accessories:  power cable, manual, interlock, key
    • Power Supply:  85V - 250 V AC
    • Power Consumption:  60 W
    • Dimensions:  200 x 165 x 141 mm
    • Weight:  5.0 kg
    Manufacturer: Laserworld

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account