Yamaha PX10 Power Amplifier

Description

The versatile Yamaha PX10 power amplifier combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8Ω / 1200W x 2 at 4Ω.

FEATURES:

  • 2x 1000W at 8ohms
  • 2x 1200W at 4ohms
  • Newly developed Class-D amplifier engine with a custom LSI
  • Flexible onboard PEQ, crossover, filters, delay, and limiter functions
  • Yamaha Speaker presets
  • Utilities for safe and secure operation

SPECIFICATION:

General

  • Internal Sampling frequency rate: 48kHz
  • A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling
  • Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
  • Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
  • S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
  • Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)

Voltage Gain/Sensitivity

  • 8Ω Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
  • Maximum input voltage: +24dBu
  • Input impedance: 20kΩ (Balance), 10kΩ (Unbalance)

I/O Connectors

  • Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
  • Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2
  • Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp

Indicators

  • POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature

Processors

  • Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay)

Latency

  • 1.5 msec (Analog Input to Speakers)

Presets

  • 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)

Proetction Circuit

  • Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
  • Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
  • Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown

Amplifier Class

  • Class D, Balanced output circuit (BTL)

Cooling

  • 16 step variable speed fan x 2, front to rear airflow

Power requirements

  • Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.

Power Consumption

  • 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)

Physical & Dimensions

  • Height: 88mm
  • Width: 480mm
  • Depth:388mm
  • Weight: 7.4kg

Manufacturer: Yamaha

Related Collections:

Product form

SKU: YAM-PX10
Barcode: 4957812587105

Out of stock

£1,161.00 Incl. VAT

    Delivery informationDelivery information

    There is a free standard delivery option for most UK orders as well as a £2.99 option which means your order will arrive faster than normal.

    For standard delivery your order should arrive within 2-5 working days. For the faster option it should be 1-3 working days.

    If you're from Northern Ireland there will be a £5 surcharge for heavier items. If you're buying a light item (under 2kg) please let us know as we may be able to refund your postage after the purchase.

    Buy now pay laterBuy now pay later

    Paypal Pay in 3 lets you spread your purchase interest free over 3 separate payments.

    If you'd like to use Paypal Pay in 3, please perform the following steps.

    1. Add the item to your cart as normal.

    2. Check out with Paypal.

    3. Log into Paypal.

    4. You should see a screen detailing the item costs. Scroll down and you should see an option for "Pay in 3".

    5. Continue the checkout process.

    1/3 of the purchase price will be taken immediately and then the rest over the next 2 months the rest of the payment will be taken.

    Please see more info about the service here.

    As with any sort of buy now pay later, please only use this service for added convenience when making a bigger purchase. It should only be used if you're 100% sure you can make all of the payments on time.

    Description

    The versatile Yamaha PX10 power amplifier combines intelligent processing with high output power to meet the requirements of a vast range of sound reinforcement environments. 1000W x 2 at 8Ω / 1200W x 2 at 4Ω.

    FEATURES:

    • 2x 1000W at 8ohms
    • 2x 1200W at 4ohms
    • Newly developed Class-D amplifier engine with a custom LSI
    • Flexible onboard PEQ, crossover, filters, delay, and limiter functions
    • Yamaha Speaker presets
    • Utilities for safe and secure operation

    SPECIFICATION:

    General

    • Internal Sampling frequency rate: 48kHz
    • A/D D/A Converters: AD/DA: 24-bit linear, 128 times over sampling
    • Total harmonic distortion: 0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
    • Frequency response: ±1.0dB (1W, 8Ω, 20Hz to 20kHz)
    • S/N ratio: 101dB (A-weighted, 8Ω, Gain setting = +14dBu)
    • Crosstalk: Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt)

    Voltage Gain/Sensitivity

    • 8Ω Volume max: 32.0dB/+9.3dBu (Gain setting: 32dB), 26.0dB/+15.3dBu (Gain setting: 26dB), 37.3dB/+4dBu (Gain setting: +4dBu), 27.3dB/+14dBu (Gain setting: +14dBu)
    • Maximum input voltage: +24dBu
    • Input impedance: 20kΩ (Balance), 10kΩ (Unbalance)

    I/O Connectors

    • Speaker output ports: Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
    • Line Input: XLR-3-31 x2, 1/4 "PHONE(TRS) x2
    • Others: USB 2.0 Standard-A Connector (Female) for Save/Load, Speaker preset update, Firmware update with USB memory; AC inlet x1 with AC cord clamp

    Indicators

    • POWER x1 (Green), ALERT x1 (Red), USB x1 (Green), PROTECT x2 (Red), CLIP/LIMIT x2 (Red), SIGNAL x2 (Green); Auto LED off feature

    Processors

    • Input summing; D-CONTOUR(FOH/MAIN, MONITOR, OFF); Delay(0 - 74msec); HPF/LPF(cutoff frequency 20Hz~20kHz with polarity control); Speaker Processor(6 band PEQ* + Limiter + Delay)

    Latency

    • 1.5 msec (Analog Input to Speakers)

    Presets

    • 8 user amplifier presets (Factory preset: Speaker presets for Yamaha passive speakers)

    Proetction Circuit

    • Load protection: POWER switch on/off: Output mute; Output voltage protection: Over voltage limiter, user configurable by wattage and speaker preset; DC-fault: Power Supply shutdown (NOT restored automatically)
    • Amplifier protection: Thermal: Output limiter (Restored automatically) → Output mute (Restored automatically); Over current: Output mute (Restored automatically); Over voltage: Output limiter (Restored automatically); Integrated Power Limit: Output limiter (Restored automatically)
    • Power supply protection: Thermal: Output limiter (Restored automatically) → Power supply shutdown; Over voltage: Power supply shutdown; Over current: Power supply shutdown

    Amplifier Class

    • Class D, Balanced output circuit (BTL)

    Cooling

    • 16 step variable speed fan x 2, front to rear airflow

    Power requirements

    • Depending on area of purchase; 100V 50Hz/60Hz, 120V 60Hz, 220V-240V 50Hz/60Hz *Verified as operating at rated power voltage +/- 10% voltage.

    Power Consumption

    • 310W (1/8 MAX power, 4Ω, Pink noise at all channels), 60W (4Ω, Idling)

    Physical & Dimensions

    • Height: 88mm
    • Width: 480mm
    • Depth:388mm
    • Weight: 7.4kg

    Manufacturer: Yamaha

    Recently viewed products

    Login

    Forgot your password?

    Don't have an account yet?
    Create account